This qualification defines the skills and knowledge required of an Engineering Tradesperson - Mechanical within metal, engineering, manufacturing and associated industries. The qualification has been specifically developed for apprentices in the above trade. The qualification packaging has been developed on an assumption that competency will be developed through a combination of on and off-the-job learning strategies such as those delivered through a formal apprenticeship. The skills associated with this qualification are intended to apply to a wide range of mechanical trade work, including undertaking fitting, assembly, manufacture, installation, modification, testing, fault finding, maintenance and service of mechanical equipment, machinery and the use of machine tools.
This qualification could lead to employment as a qualified engineering tradesperson (mechanical) in a number of different industrial or manufacturing settings. You will gain employable skills but you will also be equipped with the basic knowledge to proceed into further education in this area. You might like to think about a direct pathway into the Certificate IV in Engineering.
Certificate IV in Engineering
This course takes 4 years to complete as an Apprentice.
Each student will undertake a Pre-Training Review before enrolling to help confirm the proposed course is suitable. It will provide valuable information about an individual's existing skills and knowledge, language, literacy and numeracy skills and whether the course will help in achieving learning and/or employment goals.
4 Years
| Code | Unit Name | Hours | Material |
| MEM09002 | Interpret technical drawing | 40 | $48.00 |
| MEM11011 | Undertake manual handling | 20 | $24.00 |
| MEM12023 | Perform engineering measurements | 30 | $60.00 |
| MEM12024 | Perform computations | 30 | $36.00 |
| MEM13015 | Work safely and effectively in manufacturing and engineering | 40 | $40.00 |
| MEM14006 | Plan work activities | 40 | $48.00 |
| MEM16006 | Organise and communicate information | 20 | $24.00 |
| MEM16008 | Interact with computing technology | 20 | $24.00 |
| MEM17003 | Assist in the provision of on-the-job training | 20 | $24.00 |
| MEM18001 | Use hand tools | 20 | $24.00 |
| MEM18002 | Use power tools/hand held operations | 20 | $24.00 |
| MSMENV272 | Participate in environmentally sustainable work practices | 30 | $36.00 |
| Code | Unit Name | Hours | Material |
| MEM05004 | Perform routine oxy fuel gas welding | 20 | $24.00 |
| MEM05005 | Carry out mechanical cutting | 20 | $24.00 |
| MEM05006 | Perform brazing and/or silver soldering | 20 | $24.00 |
| MEM05007 | Perform manual heating and thermal cutting | 20 | $24.00 |
| MEM05012 | Perform routine manual metal arc welding | 20 | $24.00 |
| MEM05049 | Perform routine gas tungsten arc welding | 20 | $24.00 |
| MEM05050 | Perform routine gas metal arc welding | 20 | $24.00 |
| MEM07005 | Perform general machining | 80 | $88.00 |
| MEM07006 | Perform lathe operations | 40 | $44.00 |
| MEM07007 | Perform milling operations | 40 | $44.00 |
| MEM07008 | Perform grinding operations | 40 | $44.00 |
| MEM07011 | Perform complex milling operations | 40 | $44.00 |
| MEM07015 | Set computer controlled machines and processes | 20 | $24.00 |
| MEM07016 | Set and edit computer controlled machines and processes | 40 | $48.00 |
| MEM07021 | Perform complex lathe operations | 40 | $44.00 |
| MEM12003 | Perform precision mechanical measurement | 20 | $22.00 |
| MEM12006 | Mark off/out (general engineering) | 40 | $44.00 |
| MEM18003 | Use tools for precision work | 40 | $48.00 |
| MEM18004 | Maintain and overhaul mechanical equipment | 40 | $44.00 |
| MEM18005 | Perform fault diagnosis, installation and removal of bearings | 40 | $44.00 |
| MEM18006 | Perform precision fitting of engineering components | 60 | $66.00 |
| MEM18007 | Maintain and repair mechanical drives and mechanical transmission assemblies | 40 | $44.00 |
| MEM18009 | Perform precision levelling and alignment of machines and engineering components | 40 | $44.00 |
| MEM18012 | Perform installation and removal of mechanical seals | 20 | $22.00 |
| MEM18013 | Perform gland packing | 20 | $24.00 |
| MEM18018 | Maintain pneumatic system components | 40 | $44.00 |
| MEM18020 | Maintain hydraulic system components | 40 | $44.00 |
| MEM18055 | Dismantle, replace and assemble engineering components | 30 | $36.00 |
| TLILIC0003 | Licence to operate a forklift truck | 40 | $44.00 |
| 2020 | ||
| Government Subsidised | $4,576 | $4,576 |
| Concession | $1,841 | $1,841 |
| Apprenticeship | $4,055 | $4,055 |
| Apprenticeship Concession | $1,743 | $1,743 |
| RPL Government Subsidised | $2,066 | $2,066 |
| RPL Concession | $413 | $413 |
| RPL Self-funded | $3,100 | $3,100 |
| Self-Funded | $5,610 | $5,610 |
| Intake | Campus | Course Details |
| 2020 February | Mildura Campus | Full Time, Part Time, Classroom Based, Full Year, Apprentice |
